Repair IMEI for Qualcomm P50 Pro JAD-LX9 (EMUI 14.2) Using DT Pro Tool

Repair IMEI for Qualcomm P50 Pro JAD-LX9 (EMUI 14.2) Using DT Pro ToolOnce again, place the phone in Test Point Mode and click the "Write" button to begin flashing the file.


Flash the Bootloader File:After flashing, you will hear a peculiar sound. Proceed to flash the backup file that was saved earlier.


Select RAW File for RPL:Go to the "Select RAW File" tab and select the RPL file (this is the compressed file shared in the post).
Extract the .rar file and load the RPL file. Switch to Encrypted mode before proceeding.


Perform Test Point Again:Once again, enter Test Point Mode and press the "Write" button to flash the RPL file.

Finish Writing RPL File:After writing the RPL file, the Qualcomm port will remain open.


Enter Manufacture Mode:Put the device into Manufacture Mode by entering the code: *#*#2846579#*#* On the dialer. The phone will display "DBAdapter Reserved Interface."


IMEI Repair:Return to the "Special Task" tab and select the IMEI Repair option.


Enter Original IMEIs:Copy and paste the original IMEI numbers. You will hear a familiar sound, indicating the process is successful.


Done: The IMEI repair process is now complete.

Click here to download the required files |